1. In the Home tab, tap on the shade you want to share.
2. Scroll all the way down to the bottom of the control and settings screen.
3. Tap “Turn On Pairing Mode"
4. A prompt will appear saying “Accessory Ready to Connect”.
5. Tap “Copy Code”and perform the following steps within 15 minutes.
6. Open the app of the ecosystem you want to share the shade with.
7. Begin the flow for adding a new device, select Matter if the device isn't automatically detected,
and paste the code from the Apple Home prompt into the manual pairing code input
One of the features of Matter is Multi-Admin which lets you share your Matter-compatible smart
home device between ecosystems. Using this feature, it can be controlled by any or all of Apple
Home, Google Home, Amazon Alexa, and Samsung SmartThings simultaneously!
1. Open the settings for the shade you want to share by either of the following methods:
a. Long press on the device card and tap on the gear icon at the top right
b. Navigate to the Settings tab and tap on the device under "Devices, groups & rooms”
2. Tap “Linked Matter apps & services” and then “Link apps & services”.
3. Choose one of the provided options:
a. lf the app for the ecosystem you want to share the shadewith appears in the list, tap it and
you'll be walked through the remainder of the flow.
b. lf the app you want to share with does not appear and you want to pair with an app on the
same phone/tablet, tap “Use pairing codeand then “Copy pairing code". Open the app of
the ecosystem vou want to share the shade with. Begin the flow for adding a new device, select
Matter if the device isn't automatically detected, and paste the code from the Google Home
prompt into the manual pairing code input.
c. lf the app you want to share with does not appear and you want to pair with an app on a
different phone/tablet, tap "Share with QR code”. Open the ecosystem app you want to
share with on the other phone/tablet, begin the flow for adding a new device, and scan the
new QR code.
To Next Page
Loading...