The Smarty Micro Tuner S-06 is a high-performance electronic device designed for Common Rail Dodge Ram 5.9L, 24 Valve, Cummins Diesel Engines. It functions as a micro tuner, allowing users to modify the Engine Control Module (ECM) software, read and clear Diagnostic Trouble Codes (DTCs), and adjust speedometer settings based on tire height.
Function Description
The primary function of the Smarty Micro Tuner S-06 is to update the vehicle's ECM with various "CaTCHER" software versions, each offering different performance characteristics. This allows users to customize their engine's performance. The device also provides diagnostic capabilities, enabling users to read and clear DTCs, which can be helpful for troubleshooting engine issues. Additionally, it supports adjustments to the Anti-lock Braking System (ABS) to correct the speedometer reading when tire sizes are changed.
Important Technical Specifications
- Compatibility: Specifically designed for Common Rail Dodge Ram 5.9L, 24 Valve, Cummins Diesel Engines.
- Connectivity: Features a USB connector for connecting to a personal computer for updates and a 15-pin connector for connecting to the vehicle's OBD II diagnostic port.
- Software Versions: Offers ten different "CaTCHER" software versions (0-9) for varied performance levels.
- Speed Limiter Adjustment: Adjustable from 25 to 250 MPH in 1 MPH increments.
- Tire Height Adjustment: Adjustable from 25.00" to 45.00" in 0.05" increments.
- Display: Equipped with a display to show firmware version, tuning data version, menu options, error messages, and diagnostic information.
- Keyboard: Composed of 12 keys (0-9 numerical keys, right arrow for confirmation, left arrow for going back).
- VIN Locking: The device becomes VIN# LOCKED to a specific vehicle and ECM after its first use for ECM updates and ABS changes. It can be unlocked by restoring the ECM to STOCK software.
- Firmware and Tuning Data Updates: Both internal firmware and tuning data can be updated via the USB connector from the MADS internet site.
- Power Requirement: Requires full battery voltage for programming; all power-draining accessories must be turned off during operation.
- Operating Temperature: Not recommended for storage in temperatures below 32°F (0°C) to prevent malfunction or damage.
- Certifications: FCC compliant for North America (Model number: Smarty S-06, Trade Name: MADS, Responsible Party: MADS s.r.l.) and CE marked for European compliance with safety, health, environment, and customer protection requirements.
Usage Features
- ECM Update: Allows users to program the ECM with different "CaTCHER" software versions or restore it to the original STOCK software. The process involves turning the ignition key to the RUN position (engine OFF), connecting the Smarty, selecting the desired software, and confirming the update.
- First-Time Update: During the initial use, Smarty reads and stores the vehicle's serial number and ECM serial number, locking it to that specific vehicle.
- Changing Software: After the first update, users can switch between different "CaTCHER" programs or return to STOCK software.
- ECM Recovery: In case of an interrupted update, Smarty features a recovery procedure that guides the user through steps to restore the ECM to an operational state without needing to pull fuses or disconnect batteries.
- Reading Key-on Counter: The device can read the key-on counter stored in the ECM, demonstrating that it leaves no footprint on trip data.
- Reading and Clearing DTCs: Users can access and display diagnostic trouble codes (DTCs) stored in the ECM. The device shows the DTC "P" code and a description. After reviewing, users can choose to clear all stored DTCs.
- ABS Update (Tire Height Adjustment): Once VIN# Locked, Smarty can adjust the speedometer reading by correcting the tire height in the ABS control system. This involves entering the new tire height in inches.
- User Interface: The device uses a simple menu-driven interface with numerical keys for selection and arrow keys for navigation and confirmation.
- Safety Precautions: Users are advised to ensure the ECM is in STOCK condition before using Smarty if another programmer was used. It is critical not to connect both USB and OBD II cables simultaneously and not to unplug Smarty during an update.
Maintenance Features
- Firmware Updates: The Smarty Micro Tuner's internal firmware and tuning data can be updated by connecting it to a personal computer via a USB cable. Update software is available for download from the MADS website.
- Warranty: MADS provides a limited warranty of one year from the date of sale, covering parts within the product kit. Warranty claims require returning the product prepaid with a dated proof of purchase. The warranty does not cover labor or travel time expenses.
- Service Procedure: For warranty service, users must first restore the vehicle's ECM to STOCK software and then follow the assistance request module process on the MADS website, providing sales receipt information, serial number, problem description, and contact details. It is explicitly stated not to return a VIN# LOCKED Smarty.
- Pre-Service Center Visit: Before taking the vehicle to a service center, it is crucial to restore the ECM to STOCK software to prevent the service center from reflashing the ECM with an updated STOCK software, which would lock Smarty to an unprogrammable state.
Need help?
General
To Next Page
