EasyManua.ls Logo

SMASH 43 - Page 26

Default Icon
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English - 27/10226/102 - English
SMASH 43 SMASH 43
1. Introduction 26
2. Safety rules and precautions 27
3. Warning symbols 32
4. Machine symbols 32
5. Machine description 33
6. Start up instructions 35
7. Machine usage 39
8. Maintenance and service 41
9. Trouble shooting 44
10. Transport 46
11. Storing 46
12. Recycling or disposal your machine 46
13. Warranty 47
CE Declaration of conformity 48
Thank you for choosing this Smash machine. We
are sure that you will appreciate the quality of the
machine and that the machine will help you to carry
out its required functions for a long period of time.
Remember that this machine comes with a large and
expert after sales network to which you can take your
machine for maintenance, repair or for purchase of
spare parts and accessories.
Attention! Read all the security warnings
and the instruction manual. Non
compliance could result in fire and/or a
serious injury. Before using the machine read the
manual carefully and especially that related to secure
and correct start up.
Use this brushcutter only to cut grass and
small bushes. Any other type of usage is dangerous
and run at your own risk. Do not use the machine
for other jobs. For example, do not use the machine
to cut wood, plastic materials, bricks or construction
material. The use of the machine for other uses could
be dangerous.
Keep all the warning signs and the manual for
future reference. If you sell the machine, remember
to pass on the manual to the new owner.
The expression switch to position “open” means
offline and to position “close” means connected.
Remember user is the responsible of danger and
accidents caused to other people or things. The
manufacturer will not be liable for damages caused by
an inadequate or incorrect use of the machine.
1. INTRODUCTION
INDEX
Ref.:SDB43V20M0717V1
DATE OF PUBLICATION: 20/07/2020
DATE OF REVISION: 18/11/2020
TRANSLATION OF THE ORIGINAL INSTRUCTIONS