SMASH 43 - Page 32

English - 33/10232/102 - English
SMASH 43 SMASH 43
Warning labels indicate required information for the
use of the machine.
In order to ensure safe operation and maintenance of
the machine are the following symbols in the machine.
Air positions:
Warning and care.
Use protective non skid boots with
protective steel.
Use appropriate security gloves.
It is necessary to use eye and acoustic
protection at any time.
It is necessary to read this manual
carefully before using this machine.
Attention!: Do not touch the cutting blade.
Attention!, Danger!: The cutting tool can
project hard objects.
Caution! Hot Surface.
Do not smoke or bring a flame to the
combustible or the machine.
Fuel tank. Located in the combustible
tank cap. Mix 2 stroke oil and gasoline.
Never use only fuel or fuel in a bad
state. Mix unleaded fuel grade 95 and
synthetic oil for 2 stroke engines to
2.5% (40:1).
3. WARNING SYMBOLS
4. MACHINE SYMBOLS
Caution! Maximun speed of gear
XXXX min
-1
.
Sense of rotation.
Do not let people enter in the
work area. This area will be of a
diameter of 15 meters from the
point in which you are working.
360º
Attention!, Danger!: The cutting tool can
project hard objects.
Complies with EC Directives.
Guaranteed level of sound power Lwa,
Db(A).
XX
Positions start switch located on the right
handle of the machine.
“O”= Off (The machine don´t work)
“I”= On (The machine is ready to work)
RUN: Position for starting the
machine in cold. Located on the of air
filter cover.
CHOKE: Normal operating position.
Located in the top of the filter.
cold start
normal
operation