EasyManua.ls Logo

SMC Corporation EX260-SPN1 User Manual

SMC Corporation EX260-SPN1
39 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
No.EX※※-OMO0030-D
PRODUCT NAME
SI unit for PROFINET
MODEL / Series / Product Number
EX260 Series
Question and Answer IconNeed help?

Do you have a question about the SMC Corporation EX260-SPN1 and is the answer not in the manual?

SMC Corporation EX260-SPN1 Specifications

General IconGeneral
ModelEX260-SPN1
TypeControl Unit
Input Voltage24 VDC
Number of Inputs16
Number of Outputs16
Number of I/O points32
Protection ClassIP20
Output TypeNPN
Storage Temperature-20°C to 70°C

Summary

Operation Manual

Safety Instructions

Hazard Levels and General Safety

Explains hazard levels, compatibility, trained personnel, and service safety.

Special Conditions and Product Compliance

Covers special operating conditions, product use, warranty, and compliance.

Operator and Product Handling Safety

Product Identification and Ordering

Installation and Wiring

Wiring Details

Power Supply Connections

LED Indication and Settings

Configuration and Setup

PROFINET Configuration

Covers GSD file installation for PROFINET configuration.

Device Name Assignment

Diagnostic Parameters

Setting Diagnostic Parameters

FSU Functionality

FSU Configuration for EX260-SPN

Troubleshooting and Maintenance

Troubleshooting Chart

Provides a chart to diagnose and resolve malfunctions based on LED status.

Fault Resolution Table (1-4)

Faults 1-4: Causes and Actions

Lists probable causes and recommended actions for faults 1 through 4.

Fault Resolution Table (5-7)

Faults 5-7: Causes and Actions

Lists probable causes and recommended actions for faults 5 through 7.

Fault Resolution Table (8-9)

Faults 8-9: Causes and Actions

Lists probable causes and recommended actions for faults 8 and 9.

Maintenance Procedures

Specifications