SMC Networks EZ Connect SMCWEB-N User Manual

31
Wireless LAN
This area of the screen reflects configuration settings from the Setup → Wireless Settings
page and the
Advanced → WISH
page. The MAC Address is the factory-assigned identifier of the wireless card.
LAN Computers
This area of the screen continually updates to show all DHCP enabled computers and devices connected to
the LAN side of your access point. The detection "range" is limited to the address range as configured in
DHCP Server. Computers that have an address outside of this range will not show. If the DHCP Client (i.e. a
computer configured to "Automatically obtain an address") supplies a Host Name then that will also be shown.
Any computer or device that has a static IP address that lies within the detection "range" may show, however
its host name will not.

SMC Networks EZ Connect SMCWEB-N Specifications

General

Brand	SMC Networks
Model	EZ Connect SMCWEB-N
Category	Wireless Access Point
Language	English