47
Advanced_ Wi-Fi Protected Setup
PIN Settings
A PIN is a unique number that can be used to add the SMCWEB-N to an existing network or to create a new
network. The default PIN is printed on the bottom of the unit. For extra security, a new PIN can be generated.
You can restore the default PIN at any time. Only the Administrator ("admin" account) can change or reset the
PIN.
Current PIN
Shows the current value of the bridge's PIN.
Reset PIN to Default
Restore the default PIN of the bridge.
Generate New PIN
Create a random number that is a valid PIN. This becomes the bridge's PIN. You can then copy this
PIN to the user interface of the registrar.
Set Up Wireless
This Wizard helps you add wireless devices to the wireless network.
The wizard will either display the wireless network settings to guide you through manual configuration, prompt
you to enter the PIN for the device, or ask you to press the configuration button on the device. If the device
supports Wi-Fi Protected Setup and has a configuration button, you can add it to the network by pressing the
configuration button on the device and then pressing the button on the router within 120 seconds. Each device
To Next Page
Need help?
General
