50
Bridge Name
The name of the bridge can be changed here.
Web Idle Timeout
The maximum number of minutes that the web administration can be inactive before the administrator is
automatically logged out.
Tools_System
This section allows you to manage the bridge's configuration settings, reboot the bridge, and restore the bridge to the
factory default settings. Restoring the unit to the factory default settings will erase all settings, including any rules that
you've created.
Save To Local Hard Drive
This option allows you to save the bridge's configuration to a file on your computer. Be sure to save the
configuration before performing a firmware upgrade.
Load From Local Hard Drive
Use this option to restore previously saved bridge configuration settings.
Restore To Factory Default
This option restores all configuration settings back to the settings that were in effect at the time the bridge was
shipped from the factory. Any settings that have not been saved will be lost. If you want to save your bridge
configuration settings, use the Save Settings option above.
To Next Page
Loading...
Need help?
General
