54
Status_Wireless
The wireless section allows you to view all the access points that can be heard by your wireless bridge.
MAC Address
The Ethernet ID (MAC address) of the access point.
SSID
The network name that is used by this access point
Channel
The wireless channel that this access point is operating on.
Mode
The transmission standard being used by the access point. Values are 11a, 11b, or 11g for 802.11a, 802.11b,
or 802.11g respectively.
Privacy
The wireless security mode of the access point.
Signal
This is a relative measure of signal quality. The value is expressed as a percentage of theoretical best quality.
Signal quality can be reduced by distance, by interference from other radio-frequency sources (such as
cordless telephones or neighboring wireless networks), and by obstacles between the bridge and the access
point.
To Next Page
Loading...
Need help?
General
