Appendix A
Cables
The following are some recommendations as to what you should and
should not do when installing cables. Remember - cables are the
deciding factor in network performs
Appendix B
About RJ-45 Cables
When connecting your network devices, use standard Category 3
eight-way cables for 10Base-T configurations and Category 5 cable
for 100Base-TX. The pin assignments are as follows:
Pin 1 TD+ Pair 2 White/Orange
Pin 2 TD- Pair 2 Orange/White
Pin 3 RX+ Pair 3 White/Green
Pin 4 N/A Pair 1 Blue/White
Pin 5 N/A Pair 1 White/Blue
Pin 6 RX- Pair 3 Green/White
Pin 7 N/A Pair 4 Brown/White
Pin 8 N/A Pair 4 Brown/White
Note: Automatic MDI/MDI-X selection on RJ-45 port
Appendix C
Mini Converter Chassis
The Chassis is developed to accommodate just one media converter.
The Chassis provides AC or DC power protection for converter units.
Now, network designers can plan their Ethernet, Fast Ethernet, ATM,
or Gigabit networks without having to worry about the power source.
Furthermore, its unique sizes allows it to be installed in locations
where space is limited.
Features
• Simple and easy to install
• Adds fiber connectivity to otherwise copper based networks
• Supports 10/100/1000Base, copper, fiber, single/multi-mode, ST,
SC, MT-RJ, VF-45, LC, WDM connector converters
• Supports one media converter
• Suitable for all size of networks in all locations
• Provides internal AC and DC switching power supply
• Made from high quality durable steel
• Optional external redundant power adapter
English
English
17 18
To Next Page
Loading...
