smdv ALPHA SPEEDBOX User Manual

ALPHA SPEEDBOX
Initial Assembly
Attaching Strobe Adapter
X Y
Z
Connecting the rods
Insert the 12 rods into the rod holders on the speedring.
Securing the fabric and rods to the speedring.
Pull the elastic loops attached to the fabric over the hooks
on the rod holders.
Opening the softbox.
Pull the rods back into the groove in the speedring until
the rod holders click in place.
User Guide
X Y
Attaching strobe adapter
Unscrew the 3 pieces of locking screw on the back of the speedring. Then mount the appropriate strobe adaper.
Secure by tightening the locking screws.
[

smdv ALPHA SPEEDBOX Specifications

General

Brand	smdv
Model	ALPHA SPEEDBOX
Category	Camera Accessories
Language	English

Summary

Initial Assembly Guide

Connecting Rods to Speedring

Insert the 12 rods into the rod holders on the speedring.

Securing Fabric to Speedring

Pull the elastic loops attached to the fabric over the hooks on the rod holders.

Opening Softbox Mechanism

Pull the rods back into the speedring groove until the rod holders click.

Attaching Strobe Adapter

Mounting Strobe Adapter

Unscrew locking screws, mount adapter, and secure by tightening.

Closing and Storing the Speedbox

Closing the Speedbox

Release rods from speedring by squeezing tabs on the back.

Speedbox Storage

Tie folded speedbox with fastener and store in the carrying bag.

Product Components

Maintenance and Safety

Maintenance and Safety Warnings

Avoid high wattage lights, flammable gases. Clean with mild detergent.

Limited Warranty Information