Smeg ALFA341VE - Delayed Start and Rapid Cooling

Instructions for the user
39
5.8 Preheating with delayed start
• Turn the knob to the or symbol to select the program “P39”.
• Press the “PUSH” button for at least 3 seconds; the display shows the
current time flashing.
• Turn the knob to the or symbol to set the current time.
• Press the “PUSH” button; the display will show the minutes flashing.
• Turn the knob to the or symbol to set the minutes.
• Press the “PUSH” button; the display will show the temperature flashing.
• Turn the knob to the or symbol to set the temperature.
• Press the “PUSH” button; the display will show the cooking start time
flashing.
• Turn the knob to the or symbol to set the cooking start time.
• Press the “PUSH” button; the display will show the minutes flashing.
• Turn the knob to the or symbol to set the minutes.
• Press the “PUSH” button to exit from the data setting and saving phase. The
text “PEnd” appears on the display and after 3 seconds it will display P39,
the temperature and the preheating start time in succession.
• To start the program press the “START” button for at least 2 seconds. The
display will show the current time and “P39A” in succession until the
program is activated at the set time.
The oven will perform preheating at the set time; during this phase the display
shows “P39”, the text “InF” and the set temperature in succession; this will
continue until interrupted by the “STOP” button.
The program must be activated every day. To reactivate it set the P39 function
and press the “START” button for at least 2 seconds.
5.9 Rapid cooling
The oven is equipped with a special function that allows the oven interior to be
cooled rapidly.
To activate it, when the display shows the text “OFF”, open the door and press
the “START” button for at leasts 4 seconds.
This will activate the internal motor fan, the heating elements are switched off
and the display shows “
----“.
To stop the function, press the “STOP” button.