24
EN
2. Remove the filter drawer cover by
turning it in the direction of arrow.
3. Pull out the filter drawer.
4. Open the filter drawer by pressing the
red button.
5. Take out the filter drawer sponge.
6. Clean lint, fibre, and cotton raveling
on the filter cloth by hand or with a
soft piece of cloth.
C
When you notice a layer that may
lead clogging on filter cloth, please
clean the layer by washing in
warm water. Let the filter cloth dry
thoroughly before installing back the
filter drawer.
7. Hand-wash the filter drawer’s sponge
to remove hair and lint on it. Squeeze
the sponge by hand to remove
excessive water.
C
It is not necessary to clean the
sponge if lint and fibre accumulation
on it is not significant.
8. Place the sponge back into its place.
9. Close the filter drawer as to lock the
red button.
To Next Page
Loading...
