Smeg DHT82EIT - Warning Symbols

37
Dryer / User Manual
Energy consumption values
Programmes Capacity (kg)
Spin speed
in washing
machine (rpm)
Approximate
amount of
remaining
humidity
Energy
consumption
value kWh
Cottons cupboard dry* 8 1000 60% 1,92
Cottons Iron dry 8 1000 60% 1,5
Synthetics cupboard dry 4 800 40% 0,75
“Cotton cupboard dry programme” used at full and partial load is the standard drying
programme to which the information in the label and the fiche relates, that this programme
is suitable for drying normal wet cotton laundry and that it is the most efficient programme in
terms of energy consumption for cotton.
C
NOTE
• Extra programs may vary according to
the specifications of your machine.
• In order to receive better results from
drying machine programs, your laundry
should be washed with the appropriate
program in your washing machine and
wringed with recommended wringing
revolution..
• Very little dampness might remain
on the shirts after the program. It is
recommended that you do not leave the
shirts in the drying machine
• It is recommended to dry your delicates
in laundry bag to prevent wrinkles and
damage. When the program ends,
take your laundry out of the machine
immediately and hang them to prevent
wrinkles.
* : Energy Label standard program (EN
61121:2012) “All the filters must be cleaned
prior to test series.”All the values in the table
are determined according to EN 61121:2012
standard. Consumption values may vary from
the values in the table depending on laundry
type, wringing revolution, ambient conditions
and changes in voltage.
5.6 Auxiliary functions
Sound warning cancel
Drying machine makes sound warnings
when the program is completed. If you don’t
want sound notifications, press the “Sound
Notification” button.
When you press the sound notification button
it lights up, and program does not make sound
notifications when completed.
C
NOTE
• You can select this function before or
after the program starts.
5.7 Warning symbols
C
NOTE
• Warning symbols may vary according to
the specifications of your machine.
Fiber filter cleaning
When the program is completed, a warning led
lights up, which indicates that the filter has to
be cleaned.