Use
28
7. Press the control knob to make the
desired changes.
8. At the end of the function, “function
ended” is shown on the display and a
buzzer will sound that can be
deactivated by pressing or turning one of
the two knobs or opening the door.
Food warming
1. Position the tray on the first shelf and
place the plates to be warmed in its
centre.
2. Turn the control knob to the right or left to
select food warming (plate warmer)
from the “special functions” menu.
3. Press the control knob to confirm.
Unless otherwise set, the proving
will have a maximum duration of
13 hours.
The light inside the oven will
remain off during the proving
function.
It is not possible to modify the
temperature of the proving
function.
Do not stack plates too high. Stack
plates a maximum of 5/6 high.
To Next Page
