Why is my Smeg DWAU157XT not taking in water?
If your Smeg dishwasher isn't taking in water, make sure the water connections are correct, the water intake tap is on, and the filter isn't dirty. If the issue continues, contact the after-sales service.
What to do if my Smeg dishwasher has a water pump-out malfunction?
If your Smeg dishwasher is not pumping out water, verify that the drain hose isn't kinked or crushed and that the siphon and filter aren't blocked. If the problem continues, contact the after-sales service.
What to do if my Smeg dishwasher shows a safety level error?
If your Smeg dishwasher displays a safety level issue, interrupt the current program and turn off the dishwasher. Then, turn it back on, set the program again, and start the wash cycle. If the problem remains, contact the after-sales service.
What to do if my Smeg DWAU157XT Dishwasher has water temperature monitoring malfunction?
If your Smeg dishwasher has a water temperature monitoring malfunction, interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again and start the washing cycle. If the problem persists, contact the after-sales service.
Connects the appliance to the water source, including filter installation.
Details safe electrical connections, plug requirements, and safety measures for wiring.
Describes the layout and function of the buttons and indicator lights on the front control panel.
Explains how to adjust and refill the water softening system for optimal performance.
Guides on how to fill and use the rinse aid and detergent compartments for effective washing.
Provides essential advice for first-time use, dish loading, and pre-washing.
Details how to properly load the lower and upper baskets for best washing results.
Advises on avoiding abrasive cleaners and general cleaning procedures for the appliance exterior and interior.
General| Brand | Smeg |
|---|---|
| Model | DWAU157XT |
| Category | Dishwasher |
| Language | English |
To Next Page
