EasyManua.ls Logo

Smeg FD32ES - Temperature Control and Adjustment;12; Before Operating;12; Storing Frozen Food;12; Freezing Fresh Food;12

Smeg FD32ES
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN Instruction for use
Temperature control and adjustment
Operating temperatures are controlled by the
thermostat knob and may be set at
any
position between 1 and 5 (the coldest
position).
If the thermostat knob is in position "0" the
appliance is off. In this case neither the lamp
for inside lighting will light.
The average temperature inside the fridge
should be around +5°C (+41°F).
Therefore adjust the thermostat to obtain the
desired temperature. Some sections of the
fridge may be cooler or warmer (such as
salad crisper and top part of the cabinet)
which is quite normal. We recommend that
you check the temperature periodically with a
thermometer to ensure that the cabinet is kept
to this temperature. Frequent door openings
cause internal temperatures to rise, so it is
advisable to close the door as soon as
possible after use.
Before operating
Final Check
Before you start using the appliance check
that:
1. The feet have been adjusted for perfect
levelling.
2. The interior is dry and air can circulate
freely at the rear.
3. The interior is clean as recommended
under "Cleaning and care.”
4. The plug has been inserted into the wall
so
cket and the electricity is switched on.
When the door is open the interior light will
come on.
And note that:
5. You will hear a noise as the compressor
starts up. The liquid and gases sealed within
the refrigeration system may also make some
(noise), whether the compressor is running or
not. This is quite normal.
6. Slight undulation of the top of the cabinet is
quite normal due to the manufacturing
process used; it is not a defect.
ustment).
food
-term
than 19 hrs.
-frozen.
eration
1
2

Related product manuals