EasyManua.ls Logo

Smeg FD43PB - Before Calling Your after Sales Service

Smeg FD43PB
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
UK - 12 -
PART - 6.
BEFORE CALLING YOUR AFTER SALES SERVICE
What to do if your refrigerator does not operate;
Check that;
There is no power ,
The general switch in your home is disconnected ,
The thermostat setting is on« 0 »position ,
The socket is not sufficient. To check this, plug in another appliance that you know
which is working into the same socket.
What to do if your refrigerator performs poorly;
Check that;
You have not overloaded the appliance ,
The doors are closed perfectly ,
There is no dust on the condenser ,
There is enough place at the rear and side walls.
If there is noise;
The cooling gas which circulates in the refrigerator circuit may make a slight noise
(bubbling sound) even when the compressor is not running. Do not worry this is quite
normal. If these sounds are different check that;
The appliance is well levelled
Nothing is touching the rear.
The stuffs on the appliance are vibrating.
If your fridge is operating too loudly;
Normal Noises
Cracking (Ice cracking) Noise:
During automatic defrosting.
When the appliance is cooled or warmed (due to expansion of appliance material).
Short cracking
Heard when the thermostat switches the compressor on/off.
Compressor noise
Normal motor noise. This noise means that the compressor operates normally
Compressor may cause more noise for a short time when it is activated.
Bubbling noise and splash:
This noise is caused by the flow of the refrigerant in the tubes of the system.
Water flow noise:
Normal flow noise of water flowing to the evaporation container during defrosting.
This noise can be heard during defrosting.

Related product manuals