EasyManua.ls Logo

Smeg FD541MNED - Common Refrigerator Operational Problems

Smeg FD541MNED
41 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
35
BEFORE CALLING SERVICE
If your fridge is not operating;
 Is there any electrical fault?
 Is the plug is placed properly in the socket outlet?
 Is the fuse of the socket outlet that the plug is plugged or the main
fuse blown?
 Is the temperature setting is on correct level?
 
fridge into a socket outlet which you are sure that is working.
If your fridge is not cooling enough;
 Is the temperature setting is on correct level?
 Is the door of your fridge opened frequently and left open for a long
while?
 Is the door of fridge closed properly?
 Did you put a dish or food on your fridge so that it contacts the rear
wall of your fridge so as to prevent the air circulation?
 
 Is there adequate distance between your fridge and the rear and side
walls?
          
operating manual?
If the food in your refrigerator compartment is over cooled
 Is the temperature adjustment right? (Is the refrigerator temperature
setting level is SC?)
 Are there many food recently put inside the freezer compartment?
If so, your fridge may over cool the food inside the refrigerator
compartment as it will operate longer to cool these food.
HC
Refrigerator
comp. too
Cold
The foods starts
to freeze because
of the too much
cold temperature


2. Decrease the
refrigerator temperature
values
LOPO
Low voltage
Warning
When the power
supply gets lower
than 170 V the
appliance gets to
steady position.
This not a failure. This
prevents any damages
on the compressor. This
warning will off after the
voltage gets required
level

Related product manuals