EN -4-
BEFORE USING THE APPLIANCE
General warnings
This appliance is not intended to be used as a built-in appliance.
WARNING: Keep ventilation openings in the appliance
enclosure or in the built-in structure clear of obstruction.
WARNING: Do not use mechanical devices or other means,
other than those recommended by the manufacturer, to
accelerate the defrosting process.
WARNING: Do not use electrical appliances inside the food
storage compartments of the appliance, unless they are of
the type recommended by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
WARNING: To avoid a hazard due to the instability of the
appliance, it must be fixed in accordance with the instructions.
WARNING: When positioning the appliance, ensure the
supply cord is not trapped or damaged.
WARNING: Do not locate multiple portable socket-outlets
or portable power supplies at the rear of the appliance.
If your appliance uses R600a as a refrigerant (you can find
this information on the label on the cooler) be careful during
shipment and installation to prevent your appliance’s cooler
elements from being damaged. Although R600a is a environmental
friendly and natural gas, it is explosive. If the cooler elements
have been damaged and you suspect a leak, move the Fridge
Freezer away from any heat sources or open flame and ventilate
the room the Fridge Freezer is in for a few minutes.
• While carrying and positioning the fridge, do not damage the
cooler gas circuit.
• Do not store explosive substances such as aerosol cans with
a flammable propellant in this appliance.
PART - 1.
To Next Page
