EasyManua.ls Logo

Smeg FF08EW - 6 Shipment and Repositioning; Transportation and Changing Positioning; Repositioning the Door; 7 Before Calling After-Sales Service

Smeg FF08EW
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN - 17
in the freezer compartment.
Examine the contents when replacing
them in the freezer and if some of the
packages have thawed out, they should
be eaten within 24hours, or be cooked
and re-frozen.
After defrosting is complete, clean the
inside of the appliance with a solution
of warm water and a little bicarbonate
of soda, then dry thoroughly. Wash all
removable parts in the same way and
reassemble. Reconnect the appliance
to the mains supply and leave for 2 to
3 hours on setting number '3' before
introducing the food back into the freezer.
6 SHIPMENT AND
REPOSITIONING
6.1 Transportation and Changing
Positioning
The original packaging and foam may be
kept for re-transportation (optional).
Fasten your appliance with thick
packaging, bands or strong cords and
follow the instructions for transportation
on the packaging.
Remove all movable parts (drawers,
Ice trays and so on) or fix them into the
appliance against shocks using bands
when re-positioning or transporting.
Always carry your appliance in the
upright position.
6.2 Repositioning the Door
It is not possible to change the opening
direction of your appliance door if door
handles are installed on the front surface
of the appliance door.
It is possible to change the opening
direction of the door on models without
handles.
If the door-opening direction of your
appliance can be changed, contact the
nearest Authorised Service Centre to
change the opening direction.
7 BEFORE CALLING AFTER-
SALES SERVICE
If your freezer is not working properly,
there may be a minor problem. Check the
following.
The appliance does not operate
Check if:
There is power
The mains is connected
The thermostat setting is on the “•”
position
The socket is defective. To check this,
plug another working appliance into the
same socket.
The appliance performs poorly
Check if:
The appliance is overloaded
The appliance door is closed properly
There is any dust on the condenser
There is enough space near the rear and
side walls.
The appliance is noisy
The cooling gas which circulates in
the freezer circuit may make a slight
noise (bubbling sound) even when the
compressor is not running. Do not worry,
this is normal. If you hear a different sound,
check whether:
The appliance is level
Anything is touching the rear of the
appliance
Objects in the appliance are vibrating.
Recommendations
If the appliance is switched off or
unplugged, wait at least 5 minutes before
plugging the appliance in or restarting
it in order to prevent damage to the
compressor.
If you will not use your freezer for a long
time (e.g. in summer holidays) unplug it.
Clean your freezer according to chapter
cleaning and leave the door open to
prevent humidity and smell.

Related product manuals