183755
• The appliance is fi tted with spacers to be mounted on the top
edge of the condenser. They prevent the rear of the appliance
to be pushed too close to the wall. Spacers are fabricated
universally regarding the different distance of the condenser
from the cabinet, so make sure to position them properly.
• Use the power cord to connect the appliance to the mains
power. Wall outlet must be fi tted with ground terminal (safety
socket). Required nominal voltage and frequency are indicated
on the relevant label or rating plate of the appliance.
• Mains power connection and grounding must be made in line
with standing regulations and local requirements.
The appliance is able to accommodate minor temporary voltage
tolerances, but they may not exceed -6% to +6%.
Connecting to power
supply
Connecting to power
supply
7
To Next Page
Loading...
