To Next Page
S
Scott CurryAug 15, 2025
How to fix a Smeg Hob when the fan is not working?
- JJennifer JonesAug 15, 2025
If the fan on your Smeg Hob isn't working, it might be due to the fan cable being unplugged. Connect the cable to resolve this.
How to fix a Smeg Hob when the fan is not working?
If the fan on your Smeg Hob isn't working, it might be due to the fan cable being unplugged. Connect the cable to resolve this.
How to troubleshoot a Smeg Hob when the hood is not working?
If the hood is not working on your Smeg Hob, check if the power cable is unplugged. Reconnect the hood power cable, which can be found towards the front right underneath the hob.
What to do if my Smeg Hob shows ER03 error?
If your Smeg Hob displays the error code ER03, it means continuous key activation has been detected, likely because water or a pan is placed on the control panel. Remove any water or the pan from the ceramic glass surface and the control panel to resolve this issue.
Why does my Smeg Hob show E2 error?
If your Smeg Hob displays the E2 error, it indicates an empty or unsuitable pan, or that the pan or ceramic glass surface temperature is too high, or the electronic component temperature is too high. To fix this, let the hob cool down, use a suitable pan, and avoid heating empty pans.
What does ER21 mean on my Smeg Hob?
If your Smeg Hob displays error code ER21, it means the internal temperature of electronic parts is too high. Allow the hob to cool down. Ensure the hob has sufficient ventilation. If the error persists, please contact the After-Sales Service.
What does E8 error mean on my Smeg Hob?
If your Smeg Hob displays the error code E8, it indicates a fan fault, possibly due to the fan being blocked by dust or fibers. Clean the fan and remove any foreign bodies. If the error persists, please contact the After-Sales Service.
Why does my Smeg Hob show E3 error?
If your Smeg Hob displays the E3 error, it means you are using an unsuitable pan that is losing its magnetic properties and may damage the induction hob. Use a suitable pan. The error should automatically cancel after 8 seconds, allowing you to use the cooking area again. If the error persists, change the pan. If the error continues, please contact the After-Sales Service.
What does E6 mean on Smeg Hob?
If your Smeg Hob displays the E6 error, it indicates that the power supply voltage and/or frequency is out of range. Check the mains voltage and/or frequency. If necessary, contact the After-Sales Service.
Why is my Smeg Hob beeping upon ignition with no error code?
If your Smeg Hob makes an acoustic signal upon ignition but doesn't display an error code, it could be due to a damaged or badly connected LIN cable to the hood electronic board. Check the connection. If the issue continues, please contact After Sales Service.
General| Type | Wall-mounted |
|---|---|
| Width | 80 cm |
| Number of Speeds | 3 |
| Lighting | LED |
| Noise Level | 65 dB |
| Energy Efficiency Class | A |
| Number of Motors | 1 |
| Material | Stainless steel |
| Filter Type | Aluminum grease filter |
| Control Type | Push button |
