Smeg KSEI62 - Electrical and Air Connections; Ducted Air Exhaust Connection; Recycling Version Air Outlet; Electrical Mains Connection

EN
1
3
13
Connections
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the
chimney using either a flexible or rigid pipe ø120 mm, the choice
of which is left to the installer.
• Fix the pipe in position using sufficient pipe clamps (not sup-
plied).
• Remove any activated charcoal filters.
ø 120
9
AIR OUTLET IN RECYCLING VERSION
• Make sure that the hood body has been completely fixed.
• Make sure that hood is equipped with charcoal filters.
ELECTRICAL CONNECTION
• Connect the hood to the mains through a two-pole switch hav-
ing a contact gap of at least 3 mm.
• Remove the grease filters (see paragraph Maintenance) being
sure that the connector of the feeding cable is correctly inserted
in the socket placed on the side of the fan.