Smeg PL364CX - Page 16

Installation
16
DRAIN CONNECTION
Insert the
dishwasher’s drain
hose into a drain pipe
having a diameter of
at least 4 cm
, or
alternatively, place it
inside the kitchen sink
using the plastic
support provided,
taking care not to
crush or excessively
bend the hose. It is
important to preven
t
the hose from coming
loose and falling.
For this purpose, the plastic support is
equipped with a hole for tying it to the wall or
water tap.
The free end should be positioned at
a height of between 30 and 100 cm,
and should
never be submerged in water. If a horizontal
drain extension hose is used (for a maximum 3
m), the drain hose can be placed at a maximum
height of.
85 cm
from the ground.
Class of protection against moisture: IPX0