What to do if my Smeg Dishwasher shows error E5?
If your Smeg Dishwasher displays error code E5, ensure the water connections are correctly installed, the water supply tap is fully open, and the filter is not clogged. If the issue continues after checking these, contact technical support.
What to do if my Smeg PLA8743X Dishwasher displays error E6?
If your Smeg Dishwasher shows the E6 error, check that the drain hose isn't kinked or crushed. Also, make sure the siphon and filters are free from clogs. If the problem persists after these checks, it's best to contact technical assistance.
What to do if my Smeg PLA8743X Dishwasher is showing error E2?
If your Smeg Dishwasher is showing error E2, try interrupting the current program. Then, switch the dishwasher off and back on. Program a new cycle and press start. If the error continues, it is recommended to contact the technical assistance service.
What to do if my Smeg Dishwasher displays error E4?
If your Smeg Dishwasher displays error code E4, interrupt the program and switch off the dishwasher. Switch it back on, start a new cycle. If the problem continues, contact technical support.
What to do if my Smeg PLA8743X Dishwasher is showing error E7?
If your Smeg Dishwasher shows error code E7, interrupt the current program and switch the dishwasher off. Then, switch it back on, program a new cycle, and press start. If the problem persists, contact technical assistance.
What should I do if my Smeg PLA8743X Dishwasher displays error E8?
If your Smeg Dishwasher is showing error E8, interrupt the current program, then switch the dishwasher off and on again. Program a new cycle and press the start button. If the problem continues after this, contact technical assistance.
What to do if my Smeg PLA8743X displays error E3?
If the Smeg Dishwasher shows the E3 error, repeat the wash cycle. If the problem persists, contact technical support.
Covers switching on, selecting, starting, interrupting, and switching off programs, along with program options.
Lists fault codes (E1-E9) and their descriptions and solutions.
Covers essential safety warnings related to installation, operation, and general use of the appliance.
Explains how the water softening system works and how to refill salt.
Locates and introduces the rinse-aid and detergent dispensers.
General| Brand | Smeg |
|---|---|
| Model | PLA8743X |
| Category | Dishwasher |
| Language | English |
To Next Page
