User instructions
After using the table to identify the most appropriate washing program,
turn the
PROGRAM SELECTION
knob
(1)
(see section “3. Description
of the controls”) to set the program of choice by aligning the pointer with
the program number. If necessary, depending on the programme
selected, press one of the keys
(3
or
4)
allowing selection of the
½ LOAD
or
ECO
wash programmes.
Now simply pressing the
ON/OFF
key
(2)
will start the program. The
PILOT LIGHT (4/5)
lights up.
AMOUNT OF
DETERGENT
DURATION CONSUMPTION
SWITCH
CYCLE AND
BUTTON
TYPE AND
DEGREE
OF DIRT
ON DISHES
PROGRAM
SEQUENCE
GRAMS MINUTES
(1)
WATER
LITRES
POWER
KWh (1)
PREWASH
1
_
Pans and dishes
awaiting
completion
of the load
Cold prewash
_
6' 5
_
HEAVY
2
(1/2)
Very dirty pans
and dishes,
dirt dried-on
Cold prewash
Wash at 65°C
2 cold rinses
Rinse at 68°C
Dry
30 97' 23 1,30
NORMAL
3
(1/2)
Dishes with
normal dirt
Cold prewash
Wash at 42°C
Cold rinse
Rinse at 68°C
Dry
30 140' 22 1,12
NORMAL
ECO (*)
3
ECO 45°C
(1/2)
Dishes with
normal dirt
Cold prewash
Wash at 42°C
Cold rinse
Rinse at 45°C
Dry
30 126' 21,4 0,75
ECONOMY
4
(1/2)
Dishes with
little dirt
Wash at 42°C
Cold rinse
Rinse at 68°C
Dry
30 126' 18 1,05
RINSES
5
_
Dishes requiring
“refreshing”
Cold rinse
Rinse at 68°C
Dry
_
86' 9 0,75
Only
run the soak program with half loads.
(1/2) on some models only:
the HALF LOAD option is available for all programs except
the soak program.
(*) Reference program as AS/NZS 2007 (NORMAL ECO).
(
–
) Not present.
(1) The cycle duration and power consumption may vary according to the water and room
temperatures, and the type and amount of dishes.
To Next Page
