4.
Push the appliance in the direction of
the arrows (2) against the cupboard on
the opposite side of the hinge.
5.
Adjust the appliance in the niche.
Make sure that the distance between
the appliance and the cupboard front-
edge is 44 mm.
The lower hinge cover (in the
accessories bag) makes sure that the
distance between the appliance and the
kitchen furniture is correct.
Make sure that the clearance between
the appliance and the cupboard is 4
mm.
6. Open the door. Put the lower hinge
cover in position.
8.
Remove the correct part from the hinge
cover (E). Make sure to remove the part
DX, in the case of right hinge, SX in
opposite case.
9. Attach the covers (C, D) to the lugs and
the hinge holes.
26
To Next Page
Loading...
