EasyManua.ls Logo

Smeg SAH460SS-1 User Manual

Smeg SAH460SS-1
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Instruction manual
Cooker
Hood
Model SAH490SS/SAH460SS-1

Other manuals for Smeg SAH460SS-1

Question and Answer IconNeed help?

Do you have a question about the Smeg SAH460SS-1 and is the answer not in the manual?

Smeg SAH460SS-1 Specifications

General IconGeneral
Width60 cm
Number of Speeds3
LightingLED
FinishStainless Steel
Boost SpeedYes
Number of Lights2
Grease Filter TypeAluminium
MaterialStainless Steel
Number of Motors1
TypeWall Mounted
Control TypeElectronic

Summary

General Information and Safety Advice

Safety Precautions for Appliance Use

Advises on safe operation, ventilation, filter checks, light bulb handling, and fuel appliance use.

Understanding Your Cooker Hood

Cooker Hood Components Identification

Identifies key parts of the cooker hood including adaptor, outlet, body, motor, frame, panel, board, and filter.

Installation Prerequisites and Mode Selection

Pre-Installation Checks and Recommendations

Verify the voltage and frequency on the rating plate and ensure proper ventilation with fuel appliances.

Mounting Height and Ventilation Requirements

Recommends a minimum height of 650mm and maximum of 750mm above stove burners for optimal performance.

Ducted vs. Recirculating Modes

Explains the choice between ducted and recirculating modes and preparation for recirculating use.

Cabinet Gap Filling

Advises installing filler pieces to fill gaps between the hood and the cupboard for a neat finish.

Installation Procedures

Duct Hole Preparation and Damper Flap

Details connecting the duct hole and fixing the damper flap on the air outlet for ducted installation.

Hole Creation for Ducted Installation

Instructions on creating a hole for the duct using a template and the importance of avoiding hidden utilities.

Securing the Hood Body

Instructions on positioning the hood correctly and fixing it using self-tapping screws through the top board.

Venting Options and Hose Connection

Describes connecting the hose to the air duct with an adaptor for flexible duct size compatibility.

Vertical Flue Installation Method

Explains vertical flue installation, including running ducting through cupboards and attics to a roof cap.

Controls and Operation

Lamp and Motor Switch Functions

Details the operation of the lamp switch and the 3-speed motor switch (off, low, high) activated by pulling the slide.

Lamp Replacement

Steps for Safe Lamp Replacement

Outlines switching off power, removing the plug, and safely replacing the lamp by accessing the telescopic board.

Related product manuals