76
Instructions for the user
Removing the internal glass:
• Remove the internal glass pane
by pulling it towards you,
following the movement
indicated by the arrows. Doing
this dislodges the 4 pins
attached to the glass from their
slots in the oven door
Removing the middle glass
panes:
(pyrolytic models)
• Pyrolytic models have two
middle panes that are attached
together. Remove the middle
panes by lifting them upwards
Removing the middle glass
panes:
(multifunction models)
• Multifunction models have a
single middle pane. Remove the
middle pane by lifting it upwards
Cleaning:
• Now it is possible to clean the
external glass and the panes
removed previously. Use
absorbent kitchen roll paper. In
the case of stubborn dirt, wash
with a damp sponge and neutral
detergent.
Replacing the glass:
• Replace the glass panes in the
opposite order to which they
were removed.
• Reposition the internal glass
pane, taking care to centre and
insert the 4 pins attached to the
glass into their slots on the oven
door by applying a light pressure.
To Next Page
Loading...
Need help?
General
