Smeg SFPR9604TNR User Manual

54 - USE 914779617/C
2. Scroll through the values and select the
required cooking temperature (for example
"180°C").
3. Touch the CONFIRM button (at the
lower right ) to confirm the new cooking
temperature that has been selected.
End of cooking
To end cooking at any time:
1. touch the STOP button .
2. Touch the CONFIRM button.
Timed cooking
1. After selecting a function, touch COOKING
DURATION button or the relative
value.
2. Scroll through the values and select the
required duration (for example "1 hour").
3. Touch the CONFIRM button to confirm
the selected cooking duration.
The expected end of cooking time appears
under the duration (in the example "13:40").
4. Touch the START button to start timed
cooking.
End of cooking
At the end of cooking, "Function ended"
displays and a buzzer sounds briefly, which can
be deactivated by touching any point of the
display or by opening the door.
• Touch the HOME button to quit the
function.
Programmed cooking
1. After setting timed cooking, touch
PROGRAMMED COOKING button
or the relative value.
Timed cooking is the function which
allows a cooking operation to be
started and then ended after a specific
length of time set by the user.
The hours and minutes can be selected
separately.
The duration of the timed cooking can
be from a minimum of 1 minute to a
maximum of 13 hours.
The minutes required for pre-heating
are already included in the end-of-
cooking time.
The countdown starts after the pre-
heating has ended or if you wish to
avoid pre-heating (touch the relative
button ).
Programmed cooking is the function
which allows a time-controlled cooking
operation to be stopped at an
established time depending on the time
set by the user, after which the
appliance will switch off automatically.
For safety reasons, it is not possible to
set the end of cooking time by itself
without setting the cooking duration.

Smeg SFPR9604TNR Specifications

General

Brand	Smeg
Model	SFPR9604TNR
Category	Oven
Language	English