Use
64
The symbol appears on the front zone
display and the symbol appears on the
rear zone display. The scroll bar will be set
automatically to level 9. (preheating stage)
After three minutes of operation, the power
will be reduced to level 7.
Press the button and use the scroll bar
to modify the power level at any time.
Press the button to deactivate the Grill
function.
Auto-Vent 2.0 function
The Auto-Vent 2.0 function is disabled by
default, but can be enabled from the user
menu. Once enabled, the button
always remains dimly lit.
This function has an automatic and a
manual mode:
• Automatic mode (default), adjusts the
hood extractor fan speed according to
the total power of the appliance (see
“User menu” - option U8)
• Manual mode allows you to adjust the
extractor fan speed by pressing the
button.
After switching on the hob, to activate
manual mode:
1. Press the button, which will light up
at full brightness.
2. Each subsequent press of the button
increases the hood fan speed according
to a cyclic sequence with 5 levels of
adjustment, from 0 (off) to 4 (maximum
speed).
To go back to manual mode, the appliance
has to be switched off and on again.
• This function allows you to
control the speed of the hood
extractor fan via a wireless
connection.
• The hood must be designed to
use the Auto-Vent 2.0 function.
• The connection is always
unidirectional, from the hob to
the hood: it is not possible to
control the hob via the hood.
Refer to the hood manual for more
detailed information.
To Next Page
Loading...
