Smeg SMF01 - Operating the Mixer

Use
14
6. Slip the attachment (6) onto the lower
attachment shaft (7) and push it upwards.
Keep pressing the attachment upwards
and turn it counterclockwise until the pin
(8) locks fully into place.
7. Add the ingredients to the bowl.
8. To close, bring the motor head down by
pressing the release button (1), and then
tilt the motor head (2) backwards slightly
until it releases.
9. Keep the button pressed down and
lower the head (2), accompanying its
movement with your hand.
10. Position the pouring shield (9) on the
bowl if required, with the chute facing
outwards.
Ensure that the attachment is
correctly locked into place on the
attachment shaft.
6
7
6
8
1
2
1
2
9