Installation
100
Fastening to wall (where present)
1. Unscrew the screw behind the hob near
the gas connection.
2. Attach the chain to the cooker using the
screw removed in the previous step.
3. Stretch the chain out horizontally so that
the other end touches the wall.
4. Mark the position for the hole on the wall.
5. Drill a hole at the marked position and
insert a wall plug.
6. Attach the chain and push the appliance
towards the wall.
The length of the chain must be as
short as possible to prevent the
appliance from tipping forwards or
diagonally or from moving
sideways.
To Next Page
Loading...
