This document is a user manual for Smeg UKFS18EV2HB and UKFS18EV2HX fridge models. It provides comprehensive information on safety, installation, operation, maintenance, and technical specifications.
Function Description
This appliance is a refrigerator designed for household and domestic use, specifically for cooling and storing fresh food. It utilizes No-Frost technology to prevent ice and frost buildup by circulating dry, cold air evenly throughout the compartments. This ensures uniform cooling and eliminates the need for manual defrosting. The fridge includes various compartments and shelves for organized food storage, such as crispers for fruits and vegetables, and a chiller shelf for specific items like raw fish.
Important Technical Specifications
- Operating Voltage: 220-240 V at 50Hz.
- Refrigerant: R600a (environmentally friendly and explosive, requiring careful handling during transport and installation).
- Electrical Connection: Requires a specially grounded 13-ampere socket with a BS 1363A 13A fused plug.
- Climate Class: The appliance is designed to operate within specific ambient temperature ranges:
- T (tropical): 16 °C to 43 °C
- ST (subtropical): 16 °C to 38 °C
- N (temperate): 16 °C to 32 °C
- SN (extended temperate): 10 °C to 32 °C
- Dimensions (Overall):
- Height (H1): 1860 mm
- Width (W1): 595 mm
- Depth (D1): 704.1 mm
- Space Required in Use:
- Height (H2): 2010 mm
- Width (W2): 695 mm
- Depth (D2): 744.1 mm
- Overall Space Required in Use (Door Open):
- Width (W3): 981.6 mm
- Depth (D3): 1243.5 mm
- Ventilation: Requires clear ventilation openings, at least 150 mm clearance at the top, and a maximum of 75 mm distance between the appliance and the back wall (with plastic distance guides installed).
- Altitude: Not intended for use at altitudes exceeding 2000 m.
Usage Features
- Control Panel: Features a fridge temperature set button, a Super Cooling symbol (LED), an Alarm symbol (LED), and a fridge adjusted temperature indicator.
- Temperature Settings: The initial temperature setting is 5 °C. Pressing the temperature set button cycles through 2 °C, 4 °C, 5 °C, 6 °C, 8 °C, and Super Cooling mode.
- Super Cooling Mode: Activates for 6 hours or until the cooling sensor temperature drops below 2 °C. Recommended for cooling large quantities of food, fast cooling, or storing seasonal food for extended periods. For optimal performance, activate 6 hours before placing fresh food.
- Alarm Symbol (Alarm LED): Illuminates red in case of a problem within the fridge, such as a part malfunction, cooling process failure, or if the door is left open for more than 2 minutes.
- Door Open Alarm Function: Sounds "beep beep" if the cooler door is opened for more than 2 minutes.
- Turbo Fan: Circulates cold air homogeneously. Users should not block air inlet and outlet openings to ensure proper air circulation.
- Chiller Shelf: Designed for storing foods like raw fish, lightly pickled food, and rice, helping them retain freshness and flavor longer. Not suitable for freezing or making ice.
- Fresh Dial: Located in front of the crisper, it controls air and humidity levels to extend food life when the crisper is full. If condensation is seen on the glass shelf, the dial behind the shelf should be opened.
- Food Storage Recommendations:
- Store liquids in sealed containers to reduce humidity and frost.
- Allow warm food to cool at room temperature before placing it in the fridge.
- Avoid direct contact between food items and the rear wall to prevent frost and sticking.
- Do not open the refrigerator door frequently.
- Store meat and clean fish loosely wrapped on the glass shelf above the vegetable bin.
- Store loose fruit and vegetables in crisper containers, separating ethylene-sensitive items from ethylene-releaser fruits.
- Do not put wet vegetables into the refrigerator.
- Use closed containers or covers to prevent moisture and odors.
- Do not store potatoes, onions, or garlic in the refrigerator.
- Recommended fridge compartment temperature is 4 °C.
- Avoid storing hot food directly in the refrigerator.
- Meat products and fruit/vegetables should not be stored together to prevent cross-contamination.
Maintenance Features
- Cleaning:
- Disconnect from power supply before cleaning.
- Do not wash by pouring water directly onto the appliance.
- Use a solution of bicarbonate of soda and lukewarm water; avoid abrasive products, detergents, or soaps.
- Rinse with clean water and dry carefully.
- Ensure no water enters the lamp housing or other electrical components.
- Clean accessories separately by hand; do not use a dishwasher.
- Clean the condenser with a brush at least twice a year to save energy and increase productivity.
- Door Gasket: Must be kept clean and pliable. Replace if worn.
- LED Lighting: If the appliance has LED lighting, contact the help desk for replacement by authorized personnel only.
- Repositioning the Door: Possible on models without handles. Contact an Authorized Service Centre for this service.
- Transportation: Keep original packaging for re-transportation. Fasten the appliance securely and remove or fix all movable parts. Always carry the appliance in an upright position.
- Troubleshooting: The manual provides a guide for common issues like the fridge not operating, poor performance, or noisy operation, and suggests checks before calling after-sales service.
Need help?
General
To Next Page
