To Next PageTo Next Page
Need help?Do you have a question about the SMG ComfortBilt HP21 and is the answer not in the manual?
Important safety instructions for stove operation, failure to follow can lead to death.
Contact local officials for restrictions and inspection requirements before installation.
Surfaces are hot during operation and cool down; keep children away and supervise.
Check building codes, contact authorities for permits and inspection requirements.
Ensuring accurate assembly, safe use, and following all safety and assembly instructions.
Explanation of DANGER, WARNING, CAUTION, and IMPORTANT symbols used in the manual.
Read manual, keep children supervised, keep combustibles away, avoid hot surfaces.
Follow all building codes; contact inspectors for permits and guidelines before installation.
Follow local codes, use only pellet fuel, install smoke detector, notify insurance.
Installation, repair, and inspection by qualified personnel; keep parts clean.
Overview of the stove, burning pellet fuel guidelines, and automatic safety features.
Stove safety features for power outages and overheating conditions.
Technical details including model number, BTU input, heating capacity, electrical rating, and dimensions.
Remove all packing material and tape carefully from the stove and hopper.
Professional installation, placement, floor protection, and code compliance.
Minimum clearances to combustible walls for various installation types.
Guidelines for vent type, installation, and prohibited venting configurations.
Requirements for vent termination location and clearances from structures.
Instructions on venting installation, including wall thimbles, ceiling supports, and elbow usage.
Diagrams illustrating straight installation through wall and inside vertical rise, horizontal termination.
Diagram showing interior vertical vent installation with ceiling support and clearances.
Diagram illustrating how to retrofit the stove to a Class A chimney system.
Diagram showing installation into a masonry fireplace, including cover plate and flex section.
Diagram for zero-clearance installation into a metal fireplace hearth.
Diagram showing installation with a freestanding masonry chimney, including clean-out access.
Required for mobile homes and recommended for sealed homes to prevent negative pressure.
Mandatory requirements for mobile homes including floor attachment, air source, and grounding.
Explanation of the auger feed system, ignition, and air circulation process.
Instructions for mounting the controller and turning on the main power switch.
Ensure hopper is clean, main door closed, and select operating mode (Manual, Thermostat, Weekly).
Never use flammable liquids like gasoline or lighter fluid around the stove.
Initiating the start-up sequence, ignition, and heating room indicators.
Details on Manual, Thermostat/Temperature Control, and Weekly modes of operation.
Procedure to set start and stop times, and temperatures for each day of the week.
Instructions to set the clock and date on the controller display.
Description of each button on the control pad and its function.
Explanation of date, time, power level, temperature, mode, work stage, and other indicators.
Procedures for setting temperature units and adjusting blower voltage.
How to adjust exhaust voltage for fuel type or ventilation compensation.
Accessing diagnostics, restoring defaults, and performing shutdown.
General guidelines, daily cleaning of firepot/ash pan, and glass cleaning.
Weekly, monthly, and bi-monthly maintenance tasks for optimal performance.
Guidance for minor repairs, identifying common problems, and safety warnings.
Detailed guide for diagnosing and resolving common stove issues.
Addressing problems related to fuel feeding, hopper lid, fire burn, and igniter.
One-year warranty covering defects in material or workmanship for parts and labor.
Excludes incidental/consequential damages; void if not filled out or used negligently.
General| Brand | SMG |
|---|---|
| Model | ComfortBilt HP21 |
| Category | Pellet stove |
| Language | English |
