Smiley Lifting Solutions SPYDERCRANE URW094

Need help?

Do you have a question about the Smiley Lifting Solutions SPYDERCRANE URW094 and is the answer not in the manual?

Summary

Basic Information About Your SPYDERCRANE

Identify Your SPYDERCRANE Model

Details on identifying SPYDERCRANE models by their unique serial numbers and model number suffixes.

SPYDERCRANE Specifications and Performance

Covers traveling specifications, lifting capabilities, and deployment footprint dimensions for various models.

SPYDERCRANE Safeties and Operator Aids

Explains safety features, audible alarms, and visual warning systems for safe operation.

SPYDERCRANE Remote Controller Overview

Overview of the remote controller's functions, layout, and switches for machine operation.

QuiQ Charger for Battery-Electric Powerplants

Information on the QuiQ charger status panel, indicators, and fault codes for battery charging.

Maintaining and Servicing Your SPYDERCRANE

Daily Inspection Checklist

Comprehensive checklist for daily pre-operation inspection of the SPYDERCRANE components.

SPYDERCRANE Service Schedule

Maintenance intervals based on model and powerplant type for regular servicing requirements.

Lubrication Points and Procedures

Identifies all lubrication points and the recommended lubricants for preventive maintenance.

Fluid Checks and Replacements

Procedures for checking and replacing hydraulic oil, line filters, and track drive wheel oil.

Engine Oil and Air Filter Maintenance

Guidance on checking/replacing motor oil for gas/diesel engines and cleaning/replacing air filters.

Operating Procedures

Hook and Boom Deployment and Storage

Step-by-step instructions for safely deploying and storing the SPYDERCRANE's hook and boom.

Hook Block Grounding and Un-Grounding

Procedures for correctly grounding and un-grounding the hook block for safe operation.

Hook Block Installation and Removal

Detailed steps for installing and removing 1-part, 2-part, and 4-part hook blocks.

Wire Rope Handling (Primary Winch)

Instructions for storing, removing, and installing the wire rope on the primary winch drum.

Jib Installation and Operation

Procedures for installing the jib and connecting it for operation with hook blocks.

Auxiliary Winch Setup and Operation

Guidance on installing the auxiliary winch BTA and handling its wire rope.

Load and Performance Charts

SPYDERCRANE Load Charts

Tables detailing rated load capacities for various models based on boom stage and working radius.

SPYDERCRANE Working Range Charts

Graphical representations of operating height and radius for different boom stages and configurations.

Prohibited Zones Chart

Illustrates prohibited areas for slewing to ensure crane stability and prevent de-stabilization.

Troubleshooting and Error Codes

TPD Reset Procedures

Step-by-step instructions for soft and hard resetting the Turnover Prevention Device (TPD).

CMU Codes and System Error Resolutions

Explains common CMU codes and provides resolutions for system errors.