Smipack BP800AR 340P - User Manual

Guidance on manual usage, its integral nature, and proper handling to ensure information accessibility.

Details the warranty period, terms, and conditions for the machine, including coverage and exclusions.

Lists relevant European directives and laws that the machine complies with, such as machinery and low voltage directives.

Provides essential safety precautions for operators and employers, emphasizing knowledge of machine operation and accident risk prevention.

Explains the meaning of various graphical symbols used throughout the manual to indicate warnings and instructions.

Provides an overview of the machine and identifies its main components through a glossary and diagram.

Details the various safety systems and guards integrated into the machine for operator protection.

Explains the function of different control systems, components, and sensors used in the machine's operation.

Specifies the physical dimensions and weight of the machine, both packed and unpacked, for installation planning.

Provides instructions and recommendations for safely transporting and unpacking the machine module.

Guides on correctly placing and leveling the machine on the installation site using support feet.

Details electrical connection data, safety requirements, and pneumatic system installation data.

Outlines final checks and assembly steps, including securing components and connecting sensors, before machine operation.

Describes the output capabilities and suitability of the BP800AR 340P and BP802AR 340P models for shrink-wrapping.

Details the dimensions of formats that can be shrink-wrapped in various product collecting modes.

Provides tables to determine theoretical production capacity (packs/minute) based on product dimensions (X and Y).

Explains the step-by-step process of how the machine operates from product infeed to cooling.

Highlights specific areas of the machine that pose safety risks during operation, such as moving parts and hot surfaces.

Instructions for adjusting the infeed conveyor guides and the pusher for proper product alignment.

Procedures for adjusting the pusher stop guide for product width and the film return roller for product height.

Guidance on adjusting the sealing bar press height and the product cooling fan height.

Steps for easily positioning film reels and arranging the film path through the tensioning bars.

Instructions for performing the initial film sealing and regulating film unrolling tension.

Details on operating the oven during heat shrinking and adjusting deflectors for optimal air flow.

Explains loading the infeed conveyor and describes various operating modes like standard, collecting, and multipack.

Describes the push-buttons, display elements, signal lights, sound signals, and remote commands on the electronic control panel.

Covers machine start-up procedures, selecting operating modes (Manual, Automatic, Free Passage), and emergency stop functions.

Guides on accessing and modifying format parameters for sealing, oven, infeed, pack settings, and saving configurations.

Explains how to view machine data, use operator menus, adjust display settings, manage communications, and change passwords.

Details daily and monthly maintenance checks and operations required for optimal machine performance.

Provides instructions for cleaning the sealing group and lists parts subject to wear with their indicative duration.

Guides on replacing blades, sealing bars, sensors, and handling the electronic board, including necessary adjustments.

Instructions for disassembling the intermediate conveyor to replace the belt and replacing glass fiber bars and oven chains.

Specifies the correct lubricant and procedure for maintaining the oven conveyor chains for safe operation.

Lists common error messages, their causes, and recommended solutions for troubleshooting machine anomalies.