To Next PageTo Next Page
Need help?Do you have a question about the Smitec ICOS-PS 3160 Series and is the answer not in the manual?
General safety advice, manual interpretation, and personnel qualification.
Precautions for safe handling and assembly, including tool usage and personal protective equipment.
Detailed precautions to prevent electrical shock hazards during installation and maintenance.
Warnings and precautions regarding contact with hot surfaces and the risk of burns.
Information on residual risks, specifically electromagnetic fields affecting sensitive individuals.
Specifications related to operating temperature, humidity, degree of protection, and altitude.
Technical details of the power supply, including mains voltage, absorption, and auxiliary voltage.
Specifications for the DC output, including rated voltage, max current, and power.
Technical data for the dynamic brake output, including resistor value and power.
Details of digital inputs (Reset) and outputs (Power good, Alarm) for device status and control.
List of order codes for models and available accessories.
Mechanical specifications including weight and overall dimensions of the device.
Essential preliminary checks and operations before installing the power supply unit.
Guidelines for installation mode, specifying required free space around the device for proper operation.
Instructions for positioning and securely fastening the device within an electrical panel using M5 screws.
Details on various connection points on the device, including views and descriptions.
Description of connections available on the upper face of the device (J1, J2, J3, PE).
Description of connections available on the front face of the device (CTR).
Description of connections available on the bottom face of the device (J4, J5).
Details on connecting the 230VAC mains power supply via connector J1, including precautions.
Recommended connection schematic for TT/TN networks and single/three-phase operation.
Recommendations for conductors and protective devices (fuses, circuit breakers) for safety and correct operation.
Guidance on EMI filtering requirements and selection criteria for compliance with emission standards.
Description of the J2 connector for wiring a power resistor for dynamic braking and automatic discharge.
Details of the J3 connector for the DC BUS output, specifying pinout and electrical specifications.
Information on the CTR connector for digital I/Os, interfacing with external systems.
Procedure for setting the power supply type (single/three-phase) using a jumper on the CTR connector.
Detailed explanation of interface I/O functions: RESET, POWER GOOD, and ALARM signals.
Details on connecting an optional reactor via connector J4 to reduce current harmonics and improve power quality.
Description and function of the status LEDs on the front panel indicating device status and operation errors.
Indication of the general operational status using FLT and PWG LEDs, with corresponding actions.
Explanation of the capacitors charging phase, its importance, and LED indicators during this process.
Identification and troubleshooting of anomalies that may occur during the capacitors charging phase.
Description of normal working operation and potential anomalies, including causes and troubleshooting.
Detailed explanation of the dynamic braking circuit, energy dissipation, and its behavior with servodrives.
Detection and handling of missing phase conditions in three-phase power supply operation and its impact.
Functionality of automatic capacity discharge for the ICOS-PS 3162, especially after power interruption.
Procedure for using the digital RESET input to cancel alarm status and its operational constraints.
Step-by-step instructions for replacing the charging resistor, including necessary parts and tools.
General| Brand | Smitec |
|---|---|
| Model | ICOS-PS 3160 Series |
| Category | Power Supply |
| Language | English |
