What to do if my Smith & Noble Remote Control motor does not work?
- HHeather OrtegaAug 17, 2025
If the motor isn't working, first, ensure the power source and motor are properly connected. Also, check that the antenna cord is intact.
What to do if my Smith & Noble Remote Control motor does not work?
If the motor isn't working, first, ensure the power source and motor are properly connected. Also, check that the antenna cord is intact.
Why is the indicator light on my Smith & Noble Remote Control not working?
If the indicator light on the remote isn't shining or the remote's controlling range has become shorter, replace the battery in the remote.
How to fix Smith & Noble Remote Control drapes that don't open all the way?
If your drapes aren't opening all the way, try resetting the open limits again. Also, ensure the motor power cord is tucked away at the back of the motor with Velcro, so it doesn't interfere with the drapes closing.
What to do if Smith & Noble Remote Control drapes go beyond the rod?
If your drapes are going beyond the rod, it means your limit hasn't been set properly. Repeat setting your closed limits.
What to do if Smith & Noble Indoor Furnishing shade will not raise or lower?
If your Smith & Noble Indoor Furnishing shade isn't raising or lowering, the suggested solution is to recharge the motor.
What to do if Smith & Noble Indoor Furnishing shade runs slowly?
If your Smith & Noble Indoor Furnishing shade is running slowly, try recharging the motor.
What to do if nothing works for my Smith & Noble Motivia remote shade?
If nothing seems to work for your Smith & Noble Motivia remote shade, try unpairing the remote from the shade. Then, re-pair the remote and reset the upper and lower limits.
Why does my Smith & Noble Indoor Furnishing motor beep when operated?
If the motor of your Smith & Noble Indoor Furnishing beeps when operated, the recommended solution is to recharge the motor.
What to do if Smith & Noble Indoor Furnishing shade goes up when down button is pushed?
If your Smith & Noble Indoor Furnishing shade goes up when the down button is pushed (and vice versa), simultaneously press the LIMIT button on the underside of the remote (or the SETTING button on the wand) and the STOP button. Hold until the shade jogs and beeps. The shade should now move in the correct direction.
What to do if the Smith & Noble remote distance becomes shorter?
If the distance required to operate your Smith & Noble shade with the remote becomes shorter, replace the battery in the remote (CR2430).
Guide to a smooth installation experience and contact info for assistance.
Steps before pairing: take blind off brackets, select the channel.
Instructions for pairing the remote with 15 channels to the blind motor.
Instruction to remove plastic from the battery compartment to activate the remote.
How to use UP/DOWN buttons to control blind movement.
Using UP/DOWN buttons for precise slat angle adjustment.
Process to align cords and slats after initial installation.
How to adjust factory-set upper and lower limits for the blind.
Explanation of the 'jog' movement indicating successful programming.
Steps to set the lower operational limit for the blind.
Steps to set the upper operational limit for the blind.
How to set a specific blind position as a favorite.
How to recall a saved favorite position with the remote.
Steps to delete a previously saved favorite position.
Procedure to unpair a remote control from the blind motor.
How to turn off unused channels on the remote for easier selection.
Steps to pair an additional remote control to the blind.
Steps to unpair a specific remote control from the blind.
How to enable the jog function for precise blind adjustments.
How to disable the jog function and return to normal operation.
How to reverse the UP/DOWN button functionality of the blind.
How to adjust the acceleration and deceleration speed of the blind.
How to reset the blind motor to its original factory settings.
Steps to re-pair the remote control after a factory reset.
Verifying and correcting the blind's UP/DOWN direction.
Procedure to reset the upper operational limit of the blind.
Procedure to reset the lower operational limit of the blind.
Instructions on how to charge the blind's internal battery.
Guide on how to replace the battery in the remote control.
Guidance on selecting the optimal location for solar panel placement.
Instructions for mounting the solar panel using double-sided tape.
Visual guide for various positions for solar panel installation.
Instructions for mounting the solar panel using brackets.
How to connect the solar panel to the blind motor.
Steps to detach and remove the blind from its mounting.
Quick reference table for common operations and their associated steps.
Solutions for common problems like tilt, uneven raising, or motor issues.
General safety advice regarding window treatments and child/pet safety.
Information on the limited lifetime warranty and how to claim service.
| Brand | Smith & Noble |
|---|---|
| Model | Smart Shades |
| Category | Indoor Furnishing |
| Language | English |