EasyManua.ls Logo

Smiths Medical CADD-Solis 2131 - User Manual

Smiths Medical CADD-Solis 2131
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
x
®
. Manuel de l’opérateur - Utilisation uniquement avec la pompe à
perfusion CADD®Solis, modèle2110
/ Bedienungshandbuch - Nur zur Verwendung mit der CADD® Solis
-Infusionspumpe, Modell 2110
0 Manuale dell’operatore - Per l’uso solo con la pompa per
infusioneCADD® Solis modello 2110
1 Manual del operador - Para uso exclusivo con la bomba de infusión
CADD® Solis, modelo 2110
2 Manual do operador - Para utilização apenas com a bomba de
infusão ambulatória CADD® Solis modelo 2110
3 Gebruikershandleiding - Uitsluitend voor gebruik met de CADD® Solis-
infuuspomp model 2110
4 Bruksanvisning - Endast för användning med CADD® Solis-
infusionspumpen av modell 2110
5 Brugervejledning - Kun til brug med CADD® Solis infusionspumpe
model2110
9 取扱説明書 - CADD® -Solis
輸液ポンプモデル
2110
専用
- CADD®-Solis Communication Module
Model 2131 Operator's Manual
For use only with the CADD® Solis infusion pump model 2110

Table of Contents

Questions and Answers

  • D
    Daniel JensenAug 4, 2025
    Why does my Smiths Medical CADD-Solis 2131 Control Unit say 'Wireless On, not associated with wireless access point'?
    • H
      hmartinezAug 4, 2025
      If the wireless radio is on but not associated with a wireless access point (orange indicator) on your Smiths Medical Control Unit, several factors could be the cause. The communication module might be in heat reduction mode (consult the pump Operator's Manual for details), the wireless settings may be incorrectly configured (check and adjust them), the communication module could be too far from a wireless access point (move closer), the pump might be turning off the radio due to a depleted battery (connect to the AC adapter), or the communication module might be near an operating microwave oven (move away).
  • M
    Mary AliAug 14, 2025
    How to fix a Smiths Medical CADD-Solis 2131 Control Unit rechargeable battery that won’t charge?
    • M
      Mrs. Tammy Nelson MDAug 15, 2025
      If the rechargeable battery of your Smiths Medical Control Unit isn’t charging, make sure the AC adapter connector is fully inserted into the pump's connection port. Also, ensure the battery isn’t too hot or too cold by verifying that the environmental conditions meet the specified operating requirements. Check if the three replacement pogo pin insulators are correctly installed.
  • S
    Stephen BennettAug 25, 2025
    What to do if my Smiths Medical CADD-Solis 2131 Control Unit battery is charged but won’t work?
    • U
      umuellerAug 25, 2025
      If the rechargeable battery of your Smiths Medical Control Unit is fully charged but not working, the issue may be due to contact problems between the pump and communication module. Ensure that the contact pads on the communication module, the battery compartment, and the contacts on the pump are clean. You can also try the communication module in another pump. If the issue persists, contact Smiths Medical Customer Service.

Summary

About The CADD -Solis Communication Module, Model 2131

Installing the CADD -Solis Communication Module

Charging the Rechargeable Battery

Configuring Wireless Settings

Turning Wireless Radio On;Off

Control the wireless radio status on the communication module, turning it on or off as needed for power saving or operation.

Viewing Wireless Status and Settings

Access and review current wireless status and configuration settings directly on the pump or through the setup utility software.

Troubleshooting

Pump Alarms Associated with the Communication Module

Identify and resolve common pump alarms specific to the communication module, including battery and connection issues.

Transportation

Disposal; Collect Separately

REACH Information

Part 15 Certification and RSS Standard(s)

Cleaning and Disinfecting the Communication Module

Specifications

Safety

IEEE 802.11 a,b,g,n Radio for Network Communication

Communication Module Wireless Range

Details the operational distance for wireless communication between the module and access points.

Network Modes and Encryption

Lists supported wireless network modes (e.g., 802.11 a/b/g/n) and encryption protocols (e.g., WPA2-PSK, CCMP).

Authentication Modes

Specifies the available authentication methods for establishing secure wireless network connections.

Certificates

Lists relevant security certificates associated with the wireless communication module.

Limited Warranty

Voiding of Warranty

Defines conditions that will invalidate the product warranty, such as misuse, alteration, or unauthorized repair.

Limitations and Exclusions

Outlines the warranty's limitations, exclusions, and the manufacturer's responsibilities and disclaimers.

Smiths Medical CADD-Solis 2131 Specifications

General IconGeneral
BrandSmiths Medical
ModelCADD-Solis 2131
CategoryControl Unit
LanguageEnglish