WWW.SMITTYBILT.COM
Fig 3
Fig 4
Step 3: Install the 3 short
support tubes. First push the
tube thru the sleeve openings
in the tent body. Then clip
onto the interior pole. Clip
other end to main veranda
pole assembly. Do one pole at
a time. Fig 5&6. Once all 3
short poles are in place, install
the long pole to the outer
short poles in the middle of
the veranda. Fig 7 &8.
Fig 5
Fig 6
Veranda Support
XL models
16
Periodically check torque
of all hardware.
To Next Page
Loading...
