SmokeCloak EASY 2200 - User Manual

SmokeCloak EASY 2200
INSTALLATION AND OPERATING INSTRUCTION

Summary

Conventions

In The Box

Quick Start Guide

Specifications

Machine Layout

Installation

Position

Details proper vertical and horizontal mounting positions for the unit.

Directing the nozzle

Installing the correct nozzle for the first time

Fluid

Installing the Fluid Bottle

Step-by-step guide for correctly installing the fluid bottle and sensor.

Changing the Fluid

Priming the machine

Batteries

To install the batteries

Illustrates the process for installing the unit's batteries.

Wiring up the Machine

Wiring the mains feed

Instructions for connecting the unit to the mains power supply.

Interface board

Connection Details

Status LEDs

Explanation of the status LEDs on the interface board.

Interface Board Connections

Typical Cables required

Power

12 V powersupply, Terminal 1 & 6

Details the 12V power supply for external equipment from terminals 1 & 6.

12 V powersupply, Terminal 19 & 20

Details the 12V power supply for external equipment from terminals 19 & 20.

Digital Inputs

Verification sensor, terminal 2 & 5

Explains connecting a verification sensor to terminals 2 and 5.

Cloak sensor, terminal 3 & 5

Case open, terminal 4 & 5

12 V Inputs

Fire inhibit, terminal 7 & 8

Explains the fire inhibit function via terminals 7 and 8.

Set, terminal 9 & 10

Trigger, terminal 11 & 12

Aux In (terminals 21 and 22)

Panic

Describes the 'Panic' input function for immediate activation.

Service mode (default).

Details the 'Service Mode' properties and its behavior.

Outputs

Activation Relay (terminals 13 and 14)

Non critical fault output (terminals 15 and 16)

System fault output (terminals 17 and 18)

Aux Output (terminals 23 and 24)

Test button wiring

Cloaksensor

Installation

Provides guidance on optimal wall and sloping ceiling installation positions.

Locations to avoid for Cloaksensor

Setting the activations time.

Approximate fill volumes in m3 as a guide by

Provides a table of approximate fill volumes based on activation time.

Setting the activation time through the Interface Board

Preparation for final Test

Maintenance

PC-Tool

Updating the registry

Steps for updating the Windows registry for PC-Tool connectivity.

Installing the EASY2200 driver

Installing the configuration software

Using the software

Connecting to the EASY 2200

Steps for establishing a connection between the PC and the EASY2200 unit.

Timers

Retrigger

Backstop

Run

Upload;Download

Input Polarity

Power Save

Fluid Calibrate

AUX out (terminals 23 and 24)

AUX in (terminals 21 and 22)

SERVICE MODE

Defines the properties and behavior of the machine in service mode.

Panic

Explains the 'Panic' input function for immediate activation.

Fault Suppress

USB SAI off

System fault (terminals 17 and 18)

Activation Relay (terminals 13 and 14)

Events

Additional Controls:

Status leds

Accessories

Fluid FL600-V

Describes the exclusive SmokeCloak fluid mixture for vapour production.

Cloaksensor CS07 A

LED Strobe

Sounder IPA 117

Voice Module

Batteries

SmokeCloak EASY 2200 Specifications

General

Brand	SmokeCloak
Model	EASY 2200
Category	Fog Machine
Language	English