3
- IMPORTANT -
THE SPECIFICATIONS GIVEN IN THIS PUBLICATION DO NOT INCLUDE NORMAL MANUFACTURING TOLERANCES.
THEREFORE, THIS UNIT MAY NOT MATCH THE LISTED SPECIFICATIONS EXACTLY. ALSO, THIS PRODUCT IS TESTED
AND CALIBRATED UNDER CLOSELY CONTROLLED CONDITIONS AND SOME MINOR DIFFERENCES IN PERFORMANCE
CAN BE EXPECTED IF THOSE CONDITIONS ARE CHANGED.
AMBIENT TEMPERATURE RATING: Air flow through cells -- 125°F maximum, 40°F minimum
Electronic cells -- 250°F maximum during washing or drying
CABINET: 16 gauge galvanized steel, hinged filter access door
POWER SUPPLY: Solid state, dual voltage power supply provides 9400 Vdc to the ionizer wires and
4700 Vdc to the collector positive plates. The solid state power supply is self-regulating so the output
voltage remains constant over a wide range of cell dirt loading conditions.
ELECTRONIC CELL SPECIFICATIONS, PN 38010:
Dimensions: 24.25” x 24.125” x 10.75” deep
Cell Weight: 60 Lbs.
Collection Area: 240 sq. ft.
Voltage Gradient: 20,000 volts per inch
Ionizer Wires: 11 wires per cell, .010” diameter, tungsten
MOUNTING: a) Vertical, standing or hanging cabinet with horizontal air flow
b) Horizontal mounting with vertical air flow
DIMENSIONS: See Fig. 1, Pg. 4
RECOMMENDED AIR FLOW (CFM) WITH CORRESPONDING PRESSURE DROP AND EFFICIENCY RATING
TABLE 1
1,000
1,500
2,000
2,500
3,000
1,699
2,548
3,398
4,248
5,096
2,000
3,000
4,000
5,000
6,000
3,398
5,097
6,796
8,495
10,194
4,000
6,000
8,000
10,000
12,000
6,796
10,194
13,592
16,990
20,388
*Efficiency ratings based on National Bureau of Standards Dust Spot Method and American Society of Heating, Refrigerating and
Air Conditioning Engineers Standard 52-76 using atmospheric dust.
To Next Page
Loading...
