Do you have a question about the SMP UC40 and is the answer not in the manual?
Connect the projector with power cord and plug into AC connector. Wait for indicator light to stop flashing for standby status.
Press the power button on the remote control or the projector to turn the device on or off.
Displays a boot screen when USB or SD input is chosen, leading to multimedia options.
Adjust focus using the handle and correct trapezoidal image distortion using the keystone nut.
Lists supported audio, picture, video, and text file formats for multimedia playback.
Details the supported analog video and audio formats, including NTSC and PAL.
States compatibility with MHL cable and I-push connection for high-definition content.
Adjust picture settings like mode, color temperature, aspect ratio, and noise reduction.
Configure time-related settings such as clock, auto off, and auto on timers.
Access a submenu during video playback for functions like playlist and playback controls.
Adjust audio settings including sound mode, balance, volume, and surround sound.
Manage system options like restoring factory settings, language, and software updates.