The SmrtMugg Go is a heated travel mug designed to keep hot beverages warm. It has a capacity of 13.5 oz (400mL).

Model Name: SmrtMugg Go
Accessories: Magnetic USB Cable
Voltage: 5V
Power: 10W
Capacity: 400ml (13.5 oz)
Charging time: Approximately 4 hours for a full charge (using a 2A charger).
Size: 3.5" x 3.4" x 8"

The SmrtMugg Go consists of several key components:

Flip Cover: The top part of the lid that can be opened and closed.
Lid: The main cover that screws onto the body of the mug.
Body: The main container of the mug.
Power/Status Button: Located on the lower part of the body, used for controlling the mug's functions.
Display: An indicator screen near the power button.
Magnetic USB Cable: Used for charging the mug.

Place the mug on a flat table or surface.
Pour in hot water, coffee, or milk.
Screw on the cover.
Important Note: The SmrtMugg Go is designed to keep hot beverages hot and is not intended to warm up cold beverages.
Caution: Do not pour strong acidic or high salinity liquids, such as white vinegar, into the mug.

To Turn On: Hold the power button for 2 seconds. You will hear a beep, and if the white status light is on, the mug is powered on and/or heating.
To Power Off: Hold the power button for 2 seconds. If the white status light is off, the mug is in sleep mode.

Temperature Check: Press the power button once to check the temperature of the contents in Celsius. Press it again to switch the display to Fahrenheit.
Battery Level Check: Press the button a third time, and the display will show the remaining battery amount. The battery level is indicated by icons: a full battery icon for 50% battery and a low-level icon for low battery.
Low Battery Indicator: If the indicator light starts blinking while powered on, the battery is nearly empty. Plug in the magnetic USB cable to charge it soon. The SmrtMugg Go will power down once the battery is fully depleted.

The charging indicator will slowly blink or flash while the battery is charging.
Once the light stays on, the battery is fully charged.
A full battery charge is designed to keep hot beverages hot for approximately 90 minutes.
If you pour in a liquid that is colder and needs to be heated up, the battery will deplete faster.

To Activate Heating: Press the power button for 2 seconds. You will hear a beep, and the light will stay on. The SmrtMugg Go will heat the contents to 50°C (122°F).
Heating While Charging: You can turn on the heater while the mug is charging, provided there is enough battery charge. Press the power button for 2 seconds to turn on the mug. Note that charging will slow down while the mug is powered on and heating.

Regular cleaning of the mug is recommended.
Avoid using abrasive cleaners or harsh chemicals that could damage the mug's surface or internal components.
Ensure the charging port is dry before connecting the magnetic USB cable.

For more information and to explore other products, visit www.smrtmugg.com.

smrtmugg Go - Page 3

Related product manuals