1
ASSEMBLYINSTRUCTIONS
CongratulationsonyourpurchaseofafineSnap‐BackShuffleboard®!
Tomake itaseasyaspossible to assembleyour table, wehavepreparedthese pagesto
walkyouthroughtheassemblyprocess,stepbystep.
InordertoassemblethetableyouwillneedMETRICwrenchestotighten
thescrews.The
wrenchis includedin your box, so you shouldbe able toassemble the tablewith the tools
provided.
First,noticetherearetwo boxes. These boxes contain a cradle box and an accessories
box.
The cradle box includes a cradle, a playing surface (already assembled on
the cradle),
ramps(already assembled), Small V‐shaped ramp (already assembled) and the tools. Also
enclosed are the manufacturer's assembly instructions, which include schematics of the
tablegame,partslist,gamerulesandtheattachingscrews.
The accessory box include a scoreboard, 4 legs, 4 leg levelers, 2 shelves, a bottle of
powder,aboxofpucks,abrush,screws,andotheraccessories.
UNPACKBOXES
When you open the boxes, be sure you are careful with any boxes cutter you might be
usingtoensureyoudon'tcutthetablebymistake.
A Philips screwdriver is included in the cradle box; it can be used to open the accessory
box.
Carefullyremovethelegs,theshelves,
thescoreboardbox,thebrush,andthescrewsfrom
the box. Try not to bump these parts against the wood finish on the table to prevent
scratching. The pucks, powder, screws, brush, 502 glue and leg levelers are in the shelves
box.
Next,you will notice that there are several
plasticbags of screws.Itwas intendedthat
eachbagwouldcontainallthescrewsandwashersforeachpurpose.Forexample,onebag
islabeled"LEGSCREWS."andcontainsallthescrewsandwashersneededtoattachthelegs
tothebottomofthetable.Anotherbagislabeled"SHFLF
SCREWS."
Taketheassembledcradleoutoftheboxandplaceitupsidedownonsomethingsoft,like
arugora carpet.Aheavycorrugatedcardboardwilldoifyouarecarefulnottoscratchthe
To Next Page
Loading...