3
components were dislodged during shipping.To do this, open the back of the scoreboard
andinspecttheinside.Ifanyofthewoodbracketsareloose,usegluetoreattachthemto
ensurethedisplayglassandthePCBaresecuredtothefrontofthescoreboard.Ifyouneed
to
glueanything,waituntiltheglueisdriedbeforeproceedingwiththerestoftheassembly.
Findthe scoreboardattaching screwsand havethem ready.Set the scoreboardon the
back (Narrowend) of the table, and insert the scoreboard screwsthrough the holes in the
bottom of the scoreboard,
intothe threaded holes in the back of the table.Tighten both
screwswiththeAllenwrench.
Next,connectthe9‐pinconnectors.Pleasepayattentiontothedirectionofthemaleand
thefemaleconnectors.
Closethebackofthescoreboard,and plugtheunit in. Yourscoreboardshould
beready
touse.Turnontheelectricalpowerbyusingtheswitchlocatedunderthefrontofthetable.
Thatswitch allows you to turnthe unit on during play,and turn it off when finished.The
score for the red is increased by pushing the red button closest
to the scoreboard and
reduced by pushing the other red button.Of course, the blue works the same way. The
scoreisresetto“0000”byholdinganyofthebuttonsinfor2seconds.
FINALSTEPS
Placethetableinthelocationyouplantouseit.Wipeoffthesurfacewith the brush to
remove any stray pieces of paper, plastic or cardboard. Then sprinkle some shuffleboard
powder on the playing surface. We recommend that you use a fine shuffleboard powder
product.Youcanpurchase
itfromMegaManiaDiversions,LLCandwewillshipitouttoyou
immediately.Oryoucangetitfrommostbilliardsupplystores.
Youshouldlevelthetablebyusingalevelandadjustingtheleglevelers.Oryoucanlevel
thetablebyslidingtheweightonthe
playingsurfaceandwatchingifitmovestoonesideor
another. Either way, the leg leveler can be adjusted by turning the leveler clockwise or
counterclockwise tomovethelegupordown.You will need 2people tolevelthetable‐
onetoraisethetablewhile
theotherrotatestheadjusteronthebottomoftheleg.
To Next Page
Loading...