Snap-On BATTERY CHARGER PLUS - TECHNICAL SPECIFICATIONS; EEBC500-INT Specifications

• 5 •
EEBC500-INT-Z
Electric shock or re can cause injury
FOR ALL GROUNDED, CORD-CONNECTED BATTERY
CHARGERS:
GROUNDING AND AC POWER CORD CONNECTION
INSTRUCTIONS – The charger should be grounded to
reduce the risk of electric shock. The charger is equipped
with an electric cord having an equipment-grounding
conductor and a grounding plug. The plug must be plugged
into an outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
WARNING – Never alter the AC cord or plug provided – if
it will not t the outlet, have the proper outlet installed by a
qualied electrician. An improper connection can result in a
risk of an electric shock.
TechnicalSpecications
EEBC500-INT
Single Phase Power Supply A 230/240
Frequency Hz 50/60
Charging Voltage V 6/12/24
Starting Voltage V 6/12
Output
Currents
@ 6V A 4/15/60/300
@ 12V A 4/15/60/300
@ 24V A 4/15/30
Input Current A 0.8 to 5 continuous
24 max intermittent
Dimensions - Assembled mm 508 x 584 x 1003
Weight kg 41