6
1-1
WICHTIG!!
DIESE ANLEITUNG IST AUFZUBEWAHREN
IMPORTANT!!
CONSERVER LES PRÉSENTES INSTRUCTIONS
Safety
1.0 Safety
The Safety Precautions should be fully understood and
observed by every operator. The Operator’s Manual
will contain specific warnings and cautions when
dangerous situations may be encountered during the
procedures described.
Important safety precautions relevant to the unit are
described in the Safety Booklet, refer to Figure 1 – 1.
We suggest you store (a copy) of the Safety Booklet
near the unit, within easy reach of the operator.
1.1 Typographical conventions
This manual contains text styles intended to make the
reader pay extra attention:
Note:
Suggestion or explanation.
CA
UTION: INDICATES THAT THE FOLLOWING
ACTION MAY RESULT IN DAMAGE TO THE UNIT
OR OBJECTS ATTACHED TO IT.
WARNING: INDICATES THAT THE FOLLOWING
ACTION MAY RESULT IN (SERIOUS) INJURY TO
THE OPERATOR OR OTHERS.
• Bulleted list:
• Indicates that action must be taken by the operator
before proceeding to the next step in the sequence.
TOPIC (F n°) = see the Chapter number.
The topic indicated is explained in full in the charter
speci! er.
1.2 Manuals for the unit
The unit includes the following documentation:
-
Gui
da all’Installazione e alla Sicurezza
(standard supplement Fig. 1-1).
Installation instructions
Further installation instructions are in the Appendix
of the Operator Manual.
- Operator’s Manual (available on web).
The operator must learn in detail the instructions
contained in them and meticulously observe the
notes HAZARD and CAUTION WARNINGs.
- Spare Parts Booklet
Document used only by the Technical Support staff.
EC Declaration of Conformity
The EC Declaration is included in the Spare Parts
Booklet.
IMPORTANT!!
SAVE THESE INSTRUCTIONS
P/N: EAZ0090G58A
To Next Page
Loading...
Need help?
General
